Combined 5G/4G cellular and Wi-Fi antenna with GPS, black finish, 2 metre cable
Cellular plus Wi-Fi in one mounted antenna
The Mobility 22G is a 5-in-1 antenna combining 2 cellular elements with 2 Wi-Fi elements and an active GPS receiver in a single weatherproof housing. Designed for vehicle, vessel, and fixed-site deployments where you want both cellular and Wi-Fi MIMO from one external antenna rather than two separate units. Wide cellular coverage from LTE bands B1-B86 (excluding B31, B72, B73, B87, B88) plus 5G NR n1-n99, dual-band Wi-Fi covering 2.4 GHz and 5 GHz, and an active GPS for vehicle telematics.
The 2-cellular configuration suits routers with 2x2 cellular MIMO (BR1 Mini, BR1 Mini LTEA, BR1 Pro 5G with 2 cellular streams, BR1 Pro LTEA configured for 2x2). For routers with 4x4 cellular MIMO (BR2 Pro 5G, Balance 310X 5G), the Mobility 40G or 42G is the right antenna. The 22G's strength is integration: one mount, one cable run, both cellular and Wi-Fi covered.
Specifications
| Feature | Specification |
|---|---|
| Antenna elements | 2 cellular + 2 Wi-Fi + 1 active GPS |
| Cellular bands | LTE B1-B86 (excl. B31, B72, B73, B87, B88), 5G NR n1-n99 |
| Cellular gain | 1.2 dBi @ 617-960 MHz 5.7 dBi @ 1710-2700 MHz 5.6 dBi @ 3400-4200 MHz 6.0 dBi @ 5000-6000 MHz |
| Wi-Fi bands | 2.4 GHz, 5 GHz dual-band |
| VSWR | < 2.5 over 85% of the band |
| Connectors | 5 x SMA male (2 cellular + 2 Wi-Fi RP-SMA + 1 GPS) |
| Cable length | 2 metres |
| Mounting | Through-hole bolt, gasket sealed |
| Colour | Black |
| IP rating | IP67 |
| Operating temperature | -40 to +85°C |
| Certifications | FCC, CE, RoHS |
Where it fits
This is the right antenna for vehicle and small-vessel installs that need both cellular WAN and external Wi-Fi MIMO without separate hardware. Fleet vehicles where Wi-Fi serves the cabin and cellular serves WAN. Small commercial boats with deck-mounted hardware. Pop-up event sites where one mounted antenna covers both functions. Mobile command posts. Construction site cabins.
For 4x4 cellular MIMO, choose the Mobility 40G (4 cellular + GPS) or Mobility 42G (4 cellular + 2 Wi-Fi + GPS). For pure cellular without Wi-Fi, the 40G is more focused. The 22G's niche is dual-function in a single mount.
Self-hosted datasheet
Full datasheet PDF: Download Mobility 22G datasheet (PDF)
What's in the box
- 1 x Mobility 22G antenna (black)
- 5 x connectors with 2 m cable run (2 cellular SMA, 2 Wi-Fi RP-SMA, 1 GPS SMA)
- Mounting hardware (bolt, gasket, washer)
- Quick start guide
FAQ
22G or 42G, which? 22G has 2 cellular + 2 Wi-Fi elements. 42G has 4 cellular + 2 Wi-Fi + GPS. Pick 22G when the router has 2x2 cellular MIMO; pick 42G when it has 4x4. Cellular MIMO mismatch wastes bandwidth: a 4-stream router with a 2-element antenna runs at half capacity.
Will it work with a router that has only 2 cellular antenna inputs? Yes, that's its target use case. Connect the 2 cellular SMAs to the router's 2 cellular ports, the 2 Wi-Fi RP-SMAs to the Wi-Fi ports, and the GPS to the GPS input.
Black or white? Black is standard for most commercial vehicles, fleet, and urban deployments. White is preferred for marine and certain fixed-site installs. Both perform identically.
Is the GPS active? Yes, the GPS element is an active receiver with built-in low-noise amplifier, which is needed for routers without onboard GPS amplification. Works with all Peplink routers that have a GPS antenna input.
What about cable length? 2 metres is standard for vehicle and small-vessel installs. Longer cable variants exist as special-order SKUs (e.g. 25 ft).
Peplink Gold Partner support
The Tech Factory ships the Mobility 22G globally from our supply chain. Talk to our engineering team for combined cellular and Wi-Fi antenna planning, or matching antenna and router across a fleet rollout.